TE 550-553-700-710

MAIN TECHNICAL FEATURES

• Simplified programming via 6 keys and a backlit alphanumeric LCD.
• Synchronous control with controlled diodes, phase control current adjustment.
• Storage of 250 welding programs, 31 recallable from the outside.
• Up to 25 programmable parameters for each program.
• Slope, pulses, pre-weld, post-weld functions and adjustment of the welding times in half-periods.
• Display of the RMS welding current measurement in kA and relative angle of conduction.
• 3 operating modes: standard, constant current and constant energy.
• Welding current or angle of conduction limits.
• Double stroke function
• Stepper function to compensate the electrodes wear with programmable curve.
• Single and automatic cycle.
• WELD and NO-WELD function.
• Adjustment of first insertion delay.
• Control of 5 solenoid valves 24 VDC max. 5 W with self-protected output.
• Self-adjustment at mains frequency 50/60 Hz.
• Serial data transmission by means of optional insulated RS232 or RS485 ports.
• Output for proportional solenoid valve.
• Key for selecting foot control or two-hand control.
• Selectable languages: Italian, English, French, German, Spanish, Hungarian, Swedish or Portuguese.
• Possibility of upgrading control unit Firmware via appropriate software.
• CAN interface for future options.
• Activation and control of the electrodes dressing (optional).